Honda Twinstar, Rebel 250 and Nighthawk 250 Manual
This Clymer motorcycle manual covers the Honda Twinstar, Rebel 250 and Nighthawk 250 for the years indicated below:
Models Included are:
1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 HONDA CB250 NIGHTHAWK
1978, 1979 HONDA CM185T
1980, 1981, 1982 HONDA CM200T
1982, 1983 HONDA CM250C
1985-1987, 1996-2003 HONDA CMX250C REBEL
1986 HONDA CMX250CD
The Honda Twinstar, Rebel 250 and Nighthawk 250 manual by Clymer is the best reference book for repair and service information for your Honda Twinstar, Rebel 250 and Nighthawk 250 motorcycle. Every Clymer motorcycle service manual is written for the do-it-yourselfer as well as the experienced mechanic, Clymer motorcycle repair manuals are the cheapest way to keep your motorcycle running properly. Every Clymer motorcycle service manual contains hundreds of original photographs and illustrations obtained from the complete disassembly and assembly of the motorcycle covered. This, in addition to extensive research, is how Clymer repair manuals achieve an unmatched level of detail, accuracy and clarity to guide the reader through each service, troubleshooting and repair procedure.
The Honda Twinstar, Rebel 250 and Nighthawk 250manual includes the following chapter information:
CHAPTER ONE | GENERAL INFORMATION
Manual organization | Notes, cautions and warnings | Service hints | Torque specifications | Safety first | Special tips | Expendable parts | Parts replacement | Serial numbers | Tune-up troubleshooting tools | Basic hand tools | Mechanic's tools
CHAPTER TWO | TROUBLESHOOTING
Operating requirements | Emergency troubleshooting | Engine starting | Engine performance | Engine noises | Excessive vibration | Front suspension and steering | Brake problems
CHAPTER THREE | LUBRICATION, MAINTENANCE AND TUNE-UP
Routine checks | Pre-checks | Service intervals | Tires and wheels | Crankcase breather hose (U.S. models only) | Evaporation emission control (California models only) | Battery | Periodic lubrication | Periodic maintenance | Tune-up
CHAPTER FOUR | ENGINE
Engine | Cylinder head and camshaft | Valves and valve components | Camshaft chain and tensioner | Cylinder | Piston, piston pin and piston rings | Ignition advance mechanism | Ignition advance mechanism (breaker point ignition) | Alternator | Oil pump | Oil pump and clutch drive gears | Crankcase | Crankshaft and connecting rods | Kickstarter | Break-in procedure
CHAPTER FIVE | CLUTCH AND TRANSMISSION
Clutch | Clutch cable | Shifting mechanism | Drive sprocket | Transmission | Gearshift drum and forks
CHAPTER SIX | FUEL AND EXHAUST
Carburetor operation | Carburetor service | Carburetor (CM185T and CM200T models) | Carburetor (CM250C and Rebel 250 models) | Carburetor adjustments | Throttle cable replacement | Choke cable replacement | Fuel tank | Crankcase breather system (U.S. only) | Evaporative emission control system 1983-on California models only | Exhaust system
CHAPTER SEVEN | ELECTRICAL SYSTEM
Charging system | Alternator | Rectifier (CM185T) and regulator|rectifier (CM200T) | Voltage regulator|rectifier (CM250C, Rebel 250) | Ignition system (contact breaker point) | Ignition coil (contact breaker point ignition) | Ignition advance mechanism (contact breaker point ignition) | Ignition advance mechanism (contact breaker point ignition) | Ignition system (electronic ignition) | Ignition pulse generator | CDI unit | Ignition coil (electronic ignition) | Starting system | Starter | Starter solenoid | Clutch diode (CM250C, Rebel 250) | Lighting system | Switches | Electrical components
CHAPTER EIGHT | FRONT SUSPENSION AND STEERING
Front wheel | Inspection | Front hub | Wheels | Tire changing | Tire repairs | Handlebar | Steering head and stem | Front fork
CHAPTER NINE | REAR SUSPENSION
Rear wheel | Rear hub | Final driven sprocket and flange (Rebel 250) | Final driven sprocket (CM185T, CM200T and 1982 CM250C) | Drive pulley, final driven pulley and drive belt | Drive chain | Swing arm | Shock absorbers
CHAPTER TEN | BRAKES
Front drum brake | Front disc brake | Front brake pad replacement | Front master cylinder | Front caliper | Front brake hose replacement | Front brake disc | Bleeding the system | Rear drum brake | Front brake cable (drum brake models) | Rear brake pedal
CHAPTER ELEVEN | FRAME AND REPAINTING
Kickstand (sidestand) | Centerstand (models so equipped) | Footpegs | Frame CHAPTER TWELVE | 1991 AND LATER SERVICE INFORMATION
Routine checks | Battery | Periodic maintenance | Tune-up | Engine | Specifications | Clutch | Fuel tank | Charging system (Nighthawk 250) | Ignition system | Starting system | Starter solenoid (starter relay switch) | Clutch diode (clutch|sidestand diode and neutral switch diode) | Lighting system | Switches | Electrical components | Front wheel (Rebel 250) | Front brake pad replacement (Rebel 250) | Front caliper (Rebel 250) | Front brake hose replacement (Rebel 250) | Rear fairing (Nighthawk 250)
INDEX
WIRING DIAGRAMS
The Honda Twinstar, Rebel 250 and Nighthawk 250 manual by Clymer is the best reference book for repair and service information for your Honda Twinstar, Rebel 250 and Nighthawk 250 motorcycle.
Publisher: Clymer Manuals
Author: Ed Scott, Ron Wright
Binding: Paperback — 7 x 10 inches
Pages: 292 — Hundreds of b&w photos and illustrations
ISBN: 0892878495